Degasser Repair Services Available :

• We provide repair services for all of the Agilent and HP model G1322A, G1379A, G1379B and G4225A HPLC stand alone degasser modules plus the integrated degassers found in their newer pump modules (e.g. G1311B, G1311C, G1312B, G1312C, G4204A and G4220A & B). These modules most commonly fail after five years of normal use. RED LED ON = serious error and the system has failed. Yellow light continuously on = failed to meet specification and will completely fail soon. In both cases, the degasser is no longer working and 'out-of-compliance'. It should be repaired.

  New degasser modules cost over $4,600 each so it is well worth having them repaired. A full cleaning plus replacement of the most commonly found broken degassing module parts with new, refurbished or optionally higher quality aftermarket parts to meet most budgets are offered. We can also customize and upgrade the degassing module's performance using the latest technology utilizing smaller volume vacuum chambers to reduce total delay volume, flushing and solvent change-over times without decreasing vacuum degassing efficiency. The diagnosis, repair and testing are all done in our shop by experienced professionals with over 20 years of experience.

  • Professional Diagnostic Testing of your Degassing Module

  • Repair, Cleaning and/or Replacement of Defective Parts

  • Replacement of 12 ml Vacuum Chambers with 0.5 ml Chambers

  • Optional High Performance Vacuum Pump Upgrades

  • Complete Retrofit Upgrades with Better Performance for the G1322A

  • Options for Refurbished or New Parts to Save You Money

  • Lowest Prices, Highest Quality & Quick Repair Turnaround Times

WATERS brand HPLC degasser modules can also be repaired (hardware fault, degasser h/w fault) and we offer services for many of the models,  including the integrated degassers found in the Waters Alliance 2690, 2695, 2790, 2795, 1525, Acquity UPLC and nano Acquity as well as the Waters Inline Degasser-AF. Replacement Waters vacuum degasser pumps (e.g. 700001352), vacuum chambers (e.g. 700001218, 700001352, 700003753, 289000622) and vacuum tubing are also available at greatly reduced prices over Waters retail prices.

Most Shimadzu brand degasser modules (e.g. DGU-20A3, DGU-20A5, DGU-20A3R, DGU-20A5R, DGU-14A...) can also be diagnosed and repaired in our shop. If the red error light flashes or stays on for more than a few minutes, then this may indicate that the degasser has failed to reach proper vacuum level and requires repair (normal if it is <5 years old). Our service fees are often half the price charged by others and we stock many of the factory parts used in these modules. Fast turnaround of one to two days on most repairs.

When you send your Agilent, HP, Waters or Shimadzu brand HPLC degassing module to Chiralizer Services, we will correctly determine which parts of your degasser are defective and send you a formal quotation to service and repair the module. We do charge a nominal diagnostic fee to evaluate and test your degasser, but you retain control over the decision to have it repaired or not. Sometimes a cleaning or new vacuum tubing is all it needs. Please give us a call or send us an email to discuss your needs and we can forward you a diagnostic quote with shipping return instructions. Note: For the fastest response, please send us an email which includes your full name, company name, full address, phone #, Degasser Model #, Degasser Serial Number and problem observed.